Power operation folding doors
|
Do you open your door more than 10 times a day? Then make a sound investment and equip your folding door with power operation. With reduced thermal leakage, higher productivity, a better working environment for users and truck drivers, and a longer service life for the door, you can expect to recoup your investment even if you open your door only a few times a day. Motors and control systems for Nordic conditions Our motors and control systems are made in Sweden and are dimensioned to withstand the tough climate that can sometimes be encountered with a severe wind and snow and outdoor temperatures down to –40 °C. Doors and motors are always dimensioned as a minimum to cope with wind load class 3, i.e. hurricane strength, 33 m/s. Opening alternatives Four-section folding doors and two-section (half four-section) can be equipped with power operation in two alternative forms, top-mounted and side-mounted:
Control options
A number of control options are available for operating the door. These range from push-button keypads with open, stop and close functions to more sophisticated solutions including radio control, radar, automatic closing, coded locking, card reader, pull cord, buried loop detector and security interlock functions. The control cabinet is supplied as standard with impulse control via an integrated keypad. In addition, the control system includes a range of functions to facilitate its operation for both users, installers and service technicians, e.g. an opening cycle counter. Safety Our power operated doors naturally meet all the applicable safety requirements and standards. The doors are designed from the outset to eliminate all risk of pinching and are fully convertible to power operation without extra protection. Optical anti-pinching strips integrated into the central seals of the door and extra safety photocells for positioning in the door opening are included as standard. In addition to these personal safety functions, the motor/control system incorporates an overload sensor as a protection device. Motor-operated doors are CE marked and tested under the Construction Products Directive, the Machinery Directive, the Low Voltage Directive and the EMC Directive. |
Door from the outside
 Inwards opening with motor operation
 Top-mounting
 Side-mounting
 Outwards opening with motor operation
|
Â
Technical data and accessories
|
Wind load classes and sizes
Minimum wind load class 3, according to EN12424. Maximum size top-mounting 24 m2 and side-mounting 30 m2. Minimum door height 2700 mm.
Side clearence
Top-mounting minimum 700 mm. Side-mounting minimum 800 mm. Top clearance
Top-mounting minimum 455 mm. Side-mounting minimum 100 mm. Opening speed
Approx. 17 seconds. |
Release Operating voltage mains connection
3-phase 400V, T10A with a CEE connector as standard.
Operating voltage mains connection
3-phase 400V, T10A with a CEE connector as standard.
Motor, enclosure class |
Cabling
Complete cabling between the motor and the control unit. Complete cable runs and cabling to optical anti-pinching strips and pass door contacts.
Extra photocell
Supplied complete with cabling. Link arms and brackets
Adjustable link arms and motor arms. Link arm brackets mounted on the door.
|
 |
 |
 |
| Radio with remote control |
Radar |
Push-button keypad and
key-actuated control box
|
 |
 |
 |
| Coded locking and card reader | Buried loop detector | Pull cord opening |
